Overlay™

Overlay™ is a unique low profile floor heating system ideal for both renovation and new build projects.

 

Installed over the existing floor and only 18mm in depth, Overlay™ allows floor heating to be installed where traditional under floor systems would either require expensive excavation or would require the floor to be raised to an unacceptable level.

 

The Overlay™ system is available in 2 panel types to allow for installation to all build types and floor coverings. 

 

Overlay™ panel is a fibrous panel used for heavyweight floor coverings such as ceramics, or where the floor covering needs to be secured directly to the panel, e.g. solid wood.

 

Overlay™ systems use a 12mm pipe at 150mm pipe centres and provide excellent response times and heat output compared with traditional built in under floor heating solutions and are therefore ideal for both traditional heating systems and low temperature renewable systems.

 

 

 

 

 

 Overlay Installation Guide

 

 

 

Click Here for installation advice videos >>

 

KEY DESIGN AND INSTALLATION INFORMATION
Maximum Heat Output	approx. 100W/m²
Recommended Design Flow Temperatures	45-50°C
Maximum Circuit Length	80m
Maximum Coverage Per Circuit	12m²